Phenolic Equipment

NICE AFTERSALE SERVICE ADOPT HIGH OVERSEAS TECHNOLOGY STRONG ADOPTABILITY HIGH PRODUCTIVITY

The profile of the phenolic equipment production line

Phenolic foam as a new type of multi-purpose bubble thermal insulation material belong to level B1 real difficult to burn material. Through special processing can reach not burning standard levelA.This material is one of the best foam plastic as its good resistance to flammability (1200 Degrees Celsius, the oxygen index of 50 or more),hair smoke is low, high temperature stable performance, adiabatic heat insulation, sound insulation, good durability, known as the third generation of new thermal insulation material.

Product features

1 Level A fire prevention function

Thermal insulation layer use special fire prevention board, the system to achieve phenolic national fireproof standard level A ,from external thermal insulation fundamentally eliminate the possibility of fire, using temperature range is 250~180 Degrees Celsius

2 Heat preservation and save effect is prominent

Special fire prevention board has good phenolic thermal insulating properties, thermal conductivity is about 0.035W/(m*k),much lower than the commonly used on the market at present the organic and inorganic external wall thermal insulation products, can achieve higher energy saving effect.  

3 Solvent resistance

Special fire prevention board , solvent resistance phenolic is currently the only can directly besmear brushes the paint solvent-based insulation materials.

4 Extensive use

Not only can be used in traditional exterior insulation system, also can adorn the surface with compound make heat preservation adornment integration board, can also be used in building the traditional EPS/XPS/PU of exterior wall thermal insulation system, fire belt as curtain wall of fire prevention in heat insulating materials, insulation materials, and fire was low or high temperature occasion of fire prevention heat insulating materials.

Technical parameters:

Plate thickness	20-120 mm	production line shape dimension	45920*5365*3636
Plate width	1200mm	Pouring head reciprocating speed	<1200mmm/s
Non-woven fabrics	30-60g	Laminator laminated length	18-30m
Core material density	50-65kg/m^3	The highest temperature hot air circulation	70 Degrees Celsius,
Standard plate size	1200*4000mm	Laminator biggest open height	300mm
Production line speed	1.5-5m/min	Installed total power	130KW
The class production (8hours)	30-50m^3	String speed	4500r/min

Test project	Performance index
	B	C
Volume density (kg/m^3)	60~100	>100
Compression strength	>=0.10
Perpendicular to the direction of the layout of tensile strength (MPa)	>=0.10	>=0.13
Bibulous rate	<=7.5
Coefficient of thermal conducticity	<=0.040	<=0.046
Dimension stability	<=2
Formaldehyde release a quantity mg/L	<=5.0
Combustion performance of grade	Level A

Phenolic Equipment